Sebo Exhaust Filter for AIRBELT K
The SEBO 6608ER Exhaust Filter is designed to reduce the amount of dust emissions from the vacuums by trapping fine carbon dust from the motor brushes. This filter will fit the following Sebo Essential K series of canister vacuum models: Airbelt K2 Turbo, Kombi, Airbelt K, K1 Airbelt, K1 Komfort, K1 Pet, K1 Eco, Eco Pet, K2, K3 Premium, K3, Vulcano, K3 Airbelt
HEPA PRE-MOTOR MICROFILTERS
S-class Pre-motor Microfilters (S = “Schwebstoff” = airborne particles) are made from electrostatically charged micro-fiber material, which attracts and captures dust particles from the airflow of the vacuum before it passes over the motor to cool it. Cooling the motor with super-clean air increases motor life and reduces the possibility of maintenance, even after many years of use. The S-class Standard requires filters to absorb greater than 99.9% of particles down to 0.3 microns in diameter. For comparison, 100 microns is the diameter of a human hair. Their advantages are a relatively open texture that allows smoother airflow for better suction performance, a longer life expectancy, and they cost less than HEPA filters.
S-CLASS PRE-MOTOR MICROFILTERS
HEPA Pre-motor Microfilters (“High Efficiency Particulate Air”) remove a minimum of 99.97% of all airborne particulate matter down to 0.3 microns in diameter. Because these filters use small grid-like structures to capture dust particles, dirt build-up clogs the airflow pathway sooner than what is expected from S-class microfilters. However, SEBO’s HEPA microfilters are sold along with four-layer “Ultra-bags,” which provide highly effective filtration before the airflow goes through the HEPA microfilter, greatly increasing life expectancy and reducing the potential of diminished air flow.